Del Mar Photonics
|
|
|
Item |
Product |
Quantity |
Price (USD) |
|
1 |
Trestles 100M
Ti:Sapphire femtosecond oscillator without pump laser
Tuning range (@5W pump): 730-950* or 730-870
* - with two sets of optics
Output power (@5W pump, 800 nm): >600 mW
Repetition rate: 80 MHz
Pulse duration:
<100
fs
Spatial mode: TEMoo
Polarization: linear horizontal
Pump polarization required: linear horizontal
Also included:
Electronic starter with TTL output for pulse train observation and
synchronization of external devices
USB-controlled tuning slit for wavelength tuning in fs mode with software
|
1 |
request a quote |
|
2 |
Thermostabilized
main breadboard for the Trestles
Optional; should be
purchased simultaneously with the original Trestles laser |
1 |
request a quote |
|
3 |
Pump polarization
rotator for the Trestles
For vertically polarized
pump lasers
|
1 |
330.- |
|
4 |
Trestles LH5
Ti:Sapphire femtosecond oscillator with a 5 W built-in
DPSS pump laser LH5
Tuning range (@5W pump): 730-950* or 730-870 nm
* - with two sets of optics
Output power (@5W pump, 800 nm): >600 mW
Repetition rate: 80 MHz
Pulse duration:
<100
fs
Spatial mode: TEMoo
Polarization: linear horizontal
Pump laser: 532 nm
low-noise 5 W
DPSS laser LH5
Also included:
Thermostabilized breadboard
Electronic starter with TTL output for pulse train observation and
synchronization of external devices
USB-controlled tuning slit for wavelength tuning in fs mode with software
Closed-loop chiller unit is included in DPSS DMPLH power supply unit.
Additional chiller for cooling Ti:Sapphire crystal is not required.
|
1 |
request a quote |
|
5 |
Trestles LH10
Ti:Sapphire femtosecond oscillator with a 10 W built-in
DPSS pump laser LH10
Tuning range (@10W pump): 710-980* or 730-870 nm
Output power (@10W pump, 800 nm): >1300 mW
Repetition rate: 80 MHz
Pulse duration:
<100
fs
Spatial mode: TEMoo
Polarization: linear horizontal
Pump laser: 532 nm
low-noise
10 W
DPSS laser LH10
Also included:
Thermostabilized breadboard
Electronic starter with TTL output for pulse train observation and
synchronization of external devices
USB-controlled tuning slit for wavelength tuning in fs mode with software
Closed-loop chiller unit is included in DPSS DMPLH power supply unit.
Additional chiller for cooling Ti:Sapphire crystal is not required.
|
1 |
request a quote |
|
6 |
Additional
exchangeable fs optics set
8-mirror set of fs optics for extension of the Trestles
wavelength tuning range
|
1 |
request a quote |
|
7 |
Tunable aux CW arm
modification for the Trestles
CW cavity
arm is equipped with a BRF filter for tunable CW output (fs and CW modes are
switchable)
Tuning range (@10W pump): same as in fs mode
Output power (@800 nm):
>1800 mW@10 W pump
>700 mW @5 W pump
Linewidth: <45 GHz
USB-controlled birefringent filter with software included
This
modification should be ordered at the same time with the Trestles LH
femtosecond laser
|
1 |
request a quote |
|
8 |
Additional
exchangeable fs/CW optics set for the Trestles for fs/CW wavelength range
extension
10-mirror set for usage in both fs and tunable CW modes if
you purchase the aux CW arm modification
|
1 |
request a quote |
|
9 |
Motorized thin etalon
for CW linewidth control
USB-controlled etalon for narrowing the linewidth of the
auxiliary CW arm to <20 GHz
Note: Operates only in combination with the BRF filter.
|
1 |
request a quote |
|
10 |
Motorized thick
etalon for CW linewidth control
USB-controlled etalon for further narrowing the linewidth
of the auxiliary CW arm to <2 GHz
Note: Operates only in
combination with the BRF filter and the thin etalon.
|
1 |
request a quote |
| |
|
|
|
|
|
Trestles LH
femtosecond lasers with integrated DPSS DMPLH laser pump
- DPSS DMPLH lasers
DPSS DMP LH series lasers will pump your Ti:Sapphire laser
-
request a quote
There are LH series lasers installed all over the world pumping all makes & models
of oscillator. Anywhere from CEP-stabilized femtosecond Ti:Sapphire oscillators
to ultra-narrow-linewidth CW Ti:Sapphire oscillators. With up to 10 Watts CW
average power at 532nm in a TEMoo spatial mode, LH series
lasers has quickly proven itself
as the perfect DPSS pump laser for all types of Ti:Sapphire or dye laser.
Excellent Beam Quality
Near-perfect TEMoo mode
Designed for pumping Ti:Sapphire and dye lasers with high efficiency, the
LH series lasers
output beam has an M2 of less than 1.1 and ellipticity of less than 10%.
Available in 5 Watt, 6 Watt, 8 Watt and 10 Watt 532nm models
LH series lasers not only
offers state-of-the-art performance but also tremendous value. The laser head is
compact, sealed and permanently aligned. The power supply contains an
integrated, purpose-built chiller.
LH
series lasers is available with or without Noise
Elimination Technology.
Contact us to discuss your application with our experts - there's a good chance
we have a unit installed for the same application somewhere in the world.
Trestles LH femtosecond lasers with integrated DPSS DMPLH laser
pump - DPSS DMPLH lasers
Trestles LH10-fs/CW laser system at UC Santa Cruz Center of
Nanoscale Optofluidics
Tresltes LH10-fs/CW
laser at Harvard University is used for STED microscopy of nanodiamons